FIREYE 95UVS1E-1CEX 火焰检测器探头是一款高性能的火焰监控设备，以下是关于它的详细信息：

1. 基本信息

• 型号：95UVS1E-1CEX
• 品牌：FIREYE
• 功能：用于检测火焰，确保燃烧过程的安全与稳定。

2. 技术参数

• 电源：未明确提供，但通常火焰检测器使用标准电压和频率。
• 灵敏度：高灵敏度，能够准确识别火焰，并根据火焰的大小和强度输出相应的信号。
• 工作温度：适用于较宽的温度范围，确保在各种环境下都能稳定工作。
• 响应时间：快速响应，能在火焰出现时迅速做出反应。
• 输出方式：通常通过继电器干接点输出，着火时为ON，熄火时为OFF。
• 最大外形尺寸：具体尺寸可能因型号和生产批次而异，但FIREYE的火焰检测器通常具有紧凑的设计，方便安装和布置。

3. 功能特点

• 智能识别：采用先进的图像处理技术，能够准确识别火焰，避免误报。
• 多套程序存储：用户可在四套可编程序文件中储存不同的设定值，以适应不同燃料、负荷或工况的需求。
• 自检与诊断：具有电子自检功能，降低维护费用；同时具有自诊断功能，并在LED上显示相关信息，方便用户查看设备状态。
• 远程通信：支持远程通信，方便用户远程监控和管理。

4. 安装与使用

• 安装位置：应安装在离潜在火源较近的位置，普遍建议安装在天花板上，以便火焰沿上升的路径被检测。
• 安装步骤：包括切断电源、打孔安装、固定安装件、插入探测器、连接电源并进行测试等步骤。
• 注意事项：在安装和使用过程中，应遵守相关的安全规定和注意事项，确保设备的正常运行和人员的安全。

5. 维护与保养

• 定期对火焰检测器进行维护和测试，确保其正常工作。
• 清洁探测器周围的灰尘和蒸汽，以保证其灵敏度。
• 检查电源是否正常，如有故障应及时更换或修理。

The FIREYE 95UVS1E-1CEX Flame detector probe is a high performance flame monitoring device, the following is the details of it:

1. Basic information

Model: 95UVS1E-1CEX

Brand: FIREYE

Function: Used to detect the flame to ensure the safety and stability of the combustion process.

2. Technical parameters

Power supply: Not explicitly provided, but typically flame detectors use standard voltages and frequencies.

Sensitivity: High sensitivity, can accurately identify the flame, and output the corresponding signal according to the size and intensity of the flame.

Operating temperature: suitable for a wide temperature range, to ensure that it can work stably in various environments.

Response time: Fast response, can react quickly when the flame appears.

Output mode: Usually through the relay dry contact output, ON fire, OFF.

Maximum overall dimensions: The exact dimensions may vary by model and production lot, but FIREYE's flame detectors typically have a compact design for easy installation and layout.

3. Functional features

Intelligent recognition: The use of advanced image processing technology, can accurately identify the flame, avoid false positives.

Multiple program storage: Users can store different setpoints in four sets of programmable files to adapt to the needs of different fuels, loads or working conditions.

Self-test and diagnosis: with electronic self-test function, reduce maintenance costs; At the same time, it has a self-diagnosis function and displays relevant information on the LED to facilitate users to check the status of the device.

Remote communication: Supports remote communication to facilitate remote monitoring and management.

4. Installation and use

Installation location: It should be installed close to the potential fire source, and it is generally recommended to install it on the ceiling so that the flame can be detected along the rising path.

Installation steps: Disconnect the power supply, drill holes, fix the mounting kit, insert the detector, connect the power supply, and test.

Precautions: During installation and use, comply with the relevant safety regulations and precautions to ensure the normal operation of the equipment and the safety of personnel.

5. Maintenance and maintenance

Maintain and test the flame detector regularly to ensure that it is working properly.

Clean the dust and steam around the detector to ensure its sensitivity.

Check whether the power supply is normal. If there is a fault, replace or repair it in time.