PPD113B03-20-110611 控制器模块属于 ABB PPD113 系列工业控制器：

1. ‌硬件配置‌

处理能力‌：支持模块化架构，可实现分布式逻辑 I/O 设备部署或集中式处理，处理器模块的循环周期可低至 1 ms。

存储容量‌：参考同类产品配置，可能包含 64 KB 内部程序 Flash、128 KB 数据 Flash 及 64 KB SRAM，并支持扩展外部存储空间（最高 16 MB）。

2. ‌通信能力‌

协议支持‌：支持 PROFIBUS DP-V0/V1 主站协议，通过 RS-485 接口与从设备通信，并支持 Modbus TCP 等以太网协议。

传输性能‌：与 PROFIBUS I/O 模块的数据传输速度最快为 10 ms，支持异步传输至从设备，速率受网络波特率、节点数量及 I/O 规模影响。

3. ‌应用场景‌

工业控制‌：适用于分布式控制系统（DCS）、可编程逻辑控制器（PLC）及自动化系统，支持快速逻辑 I/O 和智能现场设备集成。

安全保护‌：可集成直流电流保护功能，测量范围达 ±600 kA，具备过电流保护及反向电流保护选项，保障生产过程安全。

4. ‌物理特性‌

安装设计‌：采用导轨安装，外型紧凑（参考同类型号尺寸为 99.5×22.5×83.5 mm），传感器头重量低于 15 kg，简化布线复杂度。

5. ‌扩展与兼容性‌

I/O 容量‌：单帧最多可处理 500 个输入和 500 个输出（布尔与模拟混合），支持事件序列（SOE）日志记录及数据类型转换。

系统集成‌：支持与高级别工厂控制系统无缝集成，可通过 Control Builder 或 MATLAB/Simulink 编程，适配不同规模应用需求。

The PPD113B03-20-110611 controller module belongs to the ABB PPD113 series industrial controllers:

1. Hardware configuration

Processing capability: Supports modular architecture, enabling distributed logic I/O device deployment or centralized processing, with processor module cycle times as low as 1 ms.

Storage capacity: Referring to the configuration of similar products, it may include 64 KB internal program Flash, 128 KB data Flash, and 64 KB SRAM, and support external storage space expansion (up to 16 MB).

2. Communication capability

Protocol support: Supports PROFIBUS DP-V0/V1 master protocol, communicates with slave devices through RS-485 interface, and supports Ethernet protocols such as Modbus TCP.

Transmission performance: The fastest data transmission speed with PROFIBUS I/O modules is 10 ms, supporting asynchronous transmission to slave devices. The speed is affected by network baud rate, number of nodes, and I/O scale.

3. Application scenarios

Industrial Control: Suitable for distributed control systems (DCS), programmable logic controllers (PLC), and automation systems, supporting fast logic I/O and intelligent field device integration.

Safety protection: It can integrate DC current protection function, with a measurement range of ± 600 kA, and has overcurrent protection and reverse current protection options to ensure the safety of the production process.

4. Physical characteristics

Installation design: Adopting guide rail installation, compact appearance (referring to the same model size of 99.5 × 22.5 × 83.5 mm), sensor head weight less than 15 kg, simplifying wiring complexity.

5. Expansion and Compatibility

I/O capacity: A single frame can handle up to 500 inputs and 500 outputs (mixed Boolean and analog), supporting sequence of events (SOE) logging and data type conversion.

System integration: Supports seamless integration with high-level factory control systems, and can be programmed through Control Builder or MATLAB/Simulink to adapt to different scale application requirements.

PPD113B03-20-110611
PPD113B01-26-111000 
USC329AE01 3BHB002482P201
USB030AE02 HIEE200072R002