产品参数：GE PMC422-LAM D2  8端口串行控制器模块

通用电气公司设计了IS220UCSAH1AMark VIe系统的处理器/控制器。Mark VI平台是通用电气公司的Speedtronic范围，旨在管理燃气轮机或蒸汽轮机。它有一个CIMPLICITY图形界面和一个

HMI，带有适用于运行重型涡轮机的软件。

这IS220UCSAH1A是一个单盒装组件，带有一个用于通信连接的前面板，两个安装在后边缘的螺丝，以及三个用于通风的格栅孔。控制器设计安装在机柜的底部。对于一个易于为三冗余系统服务的小型设置，可以并排安装三个组件

IS220UCSAH1A使用的是QNX操作系统。它有一个667兆赫的飞思卡尔8349处理器。该板由12瓦、18-36 V直流电源供电。即使在其额定温度下，该板也可以在0到65摄氏度的温度范围内工作，并且不需要风扇来冷却。NFPA一班。该板可用于2种应用。

IS220UCSAH1A的前面板包括六个母插孔连接器、一个USB端口和各种LED指示灯。它包含位于前面板左侧的Link/Act LED指示灯，以及位于面板中央的一排指示灯，分别标有“电源”、“启动”、“在线”、“闪光”、“DC”和“诊断”。

Product parameters: GE PMC422-LAM D2 8-port serial controller module

General Electric Company has designed the processor/controller for the IS220UCSAH1AMark VIe system. The Mark VI platform is the Speedtronic scope of General Electric Company, designed to manage gas or steam turbines. It has a CIMPLICITY graphical interface and a

HMI with software suitable for running heavy-duty turbines.

This IS220UCSAH1A is a single box component with a front panel for communication connections, two screws installed on the rear edge, and three grille holes for ventilation. The controller design is installed at the bottom of the cabinet. For a small setup that is easy to serve for a triple redundant system, three components can be installed side by side

IS220UCSAH1A uses the QNX operating system. It has a 667 MHz Freescale 8349 processor. The board is powered by a 12 watt, 18-36 V DC power supply. Even at its rated temperature, the board can operate within the temperature range of 0 to 65 degrees Celsius and does not require a fan for cooling. NFPA Class 1. This board can be used for two applications.

The front panel of IS220UCSAH1A includes six female jack connectors, a USB port, and various LED indicators. It includes Link/Act LED indicators located on the left side of the front panel, as well as a row of indicators located in the center of the panel, labeled "Power", "Start", "Online", "Flash", "DC", and "Diagnosis".