GE通用电气IS200ECTBG1A是一款单独的电隔离通道模块，具有一些独特的特点和应用。以下是对该模块的详细介绍：

1. 产品概述

• 品牌：GE通用电气
• 型号：IS200ECTBG1A
• 主要功能：提供单独的电隔离通道，用于支持励磁触点输入和输出。

2. 技术特点

• 电隔离设计：该模块采用电隔离设计，保证了电气系统各部分之间的隔离性和安全性。
• 支持冗余模式：由于IS200ECTBG1A被标记为1A，它可以在冗余模式下运行，增加了系统的可靠性和稳定性。
• 控制继电器触点输出和用户触点输入：该模块具有控制继电器触点输出和用户触点输入的能力，满足多种控制需求。
• 四个通用C型触点输出：控制板上配备有四个通用C型触点输出，这些输出需要通过EMIO进行连接和控制。
• 输入与供电：该模块的输入为辅助触点输入，由ECTB板以70 VDC供电。

3. 连接与接口

• 引脚连接器：在IS200ECTBG板上，有三个引脚连接器，分别标记为J405、J408和J415。
• 输出类型：在IS200ECTBG1A板上，有两种主要的输出类型：驱动用户锁定的跳闸触点输出和由EMIO板控制的通用Form-C继电器触点输出。

4. 应用领域

• 该模块作为EX2100励磁控制器系列的一部分，广泛应用于需要励磁触点输入和输出的电力系统中。

5. 价格与供应商

• 价格可能会因供应商和采购量而有所不同。一些供应商如厦门雄霸电子商务有限公司和山西润盛进出口有限公司都提供该模块，但价格可能会有所差异。

6. 注意事项

• 在使用IS200ECTBG1A模块时，请确保按照制造商的指南和建议进行正确的安装和配置，以确保系统的安全性和稳定性。

GE GE IS200ECTBG1A is a single electrically isolated channel module with some unique features and applications. The following is a detailed introduction to the module:

1. Product overview

Brand: GE General Electric

Model: IS200ECTBG1A

Main function: Provides a separate electrical isolation channel for supporting excitation contact input and output.

2. Technical features

Electrical isolation design: The module adopts electrical isolation design to ensure the isolation and safety between the various parts of the electrical system.

Support for redundant mode: Since the IS200ECTBG1A is labeled 1A, it can run in redundant mode, increasing the reliability and stability of the system.

Control relay contact output and user contact input: This module has the ability to control relay contact output and user contact input to meet a variety of control needs.

Four universal C-contact outputs: The control board is equipped with four universal C-contact outputs that need to be connected and controlled via EMIO.

Input and Power: The module's input is an auxiliary contact input, powered by the ECTB board at 70 VDC.

3. Connect and interface

Pin connectors: On the IS200ECTBG board, there are three pin connectors, labeled J405, J408, and J415.

Output types: On the IS200ECTBG1A board, there are two main output types: the trip contact output that drives user locking and the generic Form-C relay contact output that is controlled by the EMIO board.

4. Application field

The module is part of the EX2100 excitation controller family and is widely used in power systems that require excitation contact input and output.

5. Price and supplier

Prices may vary depending on the supplier and quantity purchased. Some suppliers such as Xiamen Xiongba E-commerce Co LTD and Shanxi Runsheng Import and Export Co LTD offer the module, but the price may vary.

6. Precautions

When using the IS200ECTBG1A module, ensure that it is properly installed and configured in accordance with the manufacturer's guidelines and recommendations to ensure system security and stability.