GE美国 IS200VRTDH1D 多功能可扩展控制器模块的相关信息如下：

产品概述

• 品牌与型号：GE（通用电气）/ IS200VRTDH1D
• 类型：多功能可扩展控制器模块

主要特点

1. 可扩展性：该模块设计用于扩展系统的模拟输入通道数量，从而可以连接更多的传感器并采集更多的模拟信号。
2. 通信接口：通常与控制系统连接，以将采集到的模拟信号传输给主控制系统。
3. 编程与配置：这些模块需要进行配置和编程，以适应不同的传感器类型、信号范围和应用需求。
4. 应用领域：通常用于工业自动化、过程控制、监测系统等领域，用于扩展系统的模拟输入容量。

技术规格

• 通道数量：“DH1”可能指示模块的通道数量或特定的通道配置。
• 电压/电阻变送器：“VRT”可能表示该模块适用于采集电压和/或电阻信号，如电阻传感器或电压信号。
• 尺寸与重量：具体的尺寸和重量信息未在参考文章中提及。

工作环境

• 温度：PLC要求环境温度为0~55°C。
• 湿度：为确保PLC的绝缘性能，空气的相对湿度应小于85%（无冷凝）。
• 振动：应使PLC远离强振动源，并防止振动频率为10~55Hz的频繁或连续振动。
• 气体与灰尘：空气中应无腐蚀性和易燃性气体，如氯化氢、硫化氢等。对于空气中灰尘较多或腐蚀性气体较多的环境，可将PLC安装在密封良好的控制室或控制柜中。

电源与接口

• 电源：PLC具有一定的抗电源线干扰能力。在可靠性要求高或电力干扰严重的环境中，可安装带屏蔽层的隔离变压器，以减少设备与地面之间的干扰。
• DC 24V输出：通常，PLC具有到输入端的DC 24V输出。当输入端使用外部直流电源时，应选择直流稳压电源。

GE IS200VRTDH1D Multi-function extensible controller module information is as follows:

Product overview

Make and Model: GE/IS200VRTDH1D

Type: Multifunctional expandable controller module

Main feature

Scalability: The module is designed to expand the number of analog input channels in the system so that more sensors can be connected and more analog signals can be collected.

Communication interface: usually connected with the control system to transmit the collected analog signal to the main control system.

Programming and configuration: These modules need to be configured and programmed to suit different sensor types, signal ranges, and application requirements.

Application field: It is usually used in industrial automation, process control, monitoring system and other fields to expand the analog input capacity of the system.

Technical specification

Number of channels: "DH1" may indicate the number of channels in a module or a specific channel configuration.

Voltage/resistance transmitter: "VRT" may indicate that the module is suitable for collecting voltage and/or resistance signals, such as resistance sensors or voltage signals.

Size and weight: Specific size and weight information is not mentioned in the reference article.

Working environment

Temperature: The PLC requires an ambient temperature of 0 to 55°C.

Humidity: In order to ensure the insulation performance of the PLC, the relative humidity of the air should be less than 85% (no condensation).

Vibration: The PLC should be kept away from the strong vibration source and prevent frequent or continuous vibration with a vibration frequency of 10~55Hz.

Gas and dust: There should be no corrosive and flammable gases in the air, such as hydrogen chloride, hydrogen sulfide, etc. For environments with more dust or corrosive gases in the air, the PLC can be installed in a well-sealed control room or control cabinet.

Power supply and interface

Power supply: PLC has a certain ability to resist power line interference. In environments with high reliability requirements or severe power interference, isolation transformers with shielding layers can be installed to reduce interference between equipment and the ground.

DC 24V output: Typically, a PLC has a DC 24V output to the input. When the input uses an external DC power supply, select a DC regulated power supply.