ABB PFCL201CE 10KN 3BSX105983-100压力传感器是一款高性能的测量设备，以下是关于它的详细信息和特点：

1. 产品概述：
• PFCL201CE 10KN是ABB公司推出的一款压力传感器，特别适用于需要高精度和可靠性的应用环境。
• 型号中的“10KN”表示其测量范围为10千牛顿（或约为1吨）的垂直力。
• “3BSX105983-100”是该传感器的特定序列号或型号编码。
2. 测量原理：
• 该传感器基于先进的Pressductor®技术和磁性材料在机械应力作用下磁导率变化的事实。
• 当传感器在测量方向上受到机械力时，磁场的传播会发生变化，从而在绕组中产生交变电压。
• 控制单元将该交变电压转换为与外力成比例的直流电压，从而实现压力或力的测量。
3. 主要特点：
• 高精度：传感器能够准确地测量垂直方向的力，并在整个测量范围内保持高精度。
• 稳定性好：经过精心设计和制造，传感器在各种环境条件下都能保持稳定的性能。
• 可靠性强：传感器具有较高的可靠性和稳定性，能够长时间稳定地工作，减少故障和维护成本。
• 易于安装和调试：传感器设计合理，安装简便，且易于与各种设备和系统集成。
4. 技术参数：
• 测量范围：10千牛顿（10KN）
• 重复性误差：该参数未在给定信息中提及，但通常表示为额定负载下灵敏度的百分比。
• 补偿温度范围：传感器在特定温度范围内对温度漂移进行了补偿，确保在不同温度下的准确测量。
• 工作温度范围：传感器能在规定的温度范围内正常工作，并保持规定的精度。
• 存储温度范围：传感器可以储存的温度范围。
• 零点随温度的漂移和灵敏度随温度的漂移：这些参数描述了传感器在不同温度下的性能变化。
5. 应用场景：
• PFCL201CE 10KN 3BSX105983-100压力传感器广泛应用于需要高精度测量的工业领域，如工业称重、过程控制、计量和自动化等。
6. 安装和布置：
• 传感器应安装在一个方向上，以提供足够的测量力（FR），从而达到尽可能高的精度。
• 安装时，应将传感器放置在能够准确感知测量力的位置，并避免其他方向上的力干扰。

The ABB PFCL201CE 10KN 3BSX105983-100 pressure sensor is a high performance measurement device, the following are the details and features of it:

Product Overview:

The PFCL201CE 10KN is a pressure sensor from ABB that is particularly suitable for applications that require high accuracy and reliability.

The "10KN" in the model indicates a vertical force with a measurement range of 10 kilonewtons (or about 1 ton).

"3BSX105983-100" is the specific serial number or model number of this sensor.

Measurement principle:

The sensor is based on advanced Pressductor® technology and the fact that the permeability of magnetic materials changes under mechanical stress.

When the sensor is subjected to a mechanical force in the direction of measurement, the propagation of the magnetic field changes, creating an alternating voltage in the winding.

The control unit converts this alternating voltage into a DC voltage proportional to the external force, thus achieving the measurement of pressure or force.

Main features:

High accuracy: The sensor is able to accurately measure the force in the vertical direction and maintain high accuracy throughout the measurement range.

Good stability: After careful design and manufacture, the sensor can maintain stable performance under various environmental conditions.

Strong reliability: The sensor has high reliability and stability, and can work stably for a long time, reducing failure and maintenance costs.

Easy installation and commissioning: The sensor is reasonably designed, easy to install, and easy to integrate with a variety of equipment and systems.

Technical parameters:

Measuring range: 10 kN (10KN)

Repeatability error: This parameter is not mentioned in the given information, but is usually expressed as a percentage of sensitivity at rated load.

Compensated temperature range: The sensor compensates for temperature drift over a specific temperature range, ensuring accurate measurement at different temperatures.

Operating temperature range: The sensor can work normally within the specified temperature range and maintain the specified accuracy.

Storage temperature range: The temperature range in which the sensor can be stored.

Zero point drift with temperature and sensitivity drift with temperature: These parameters describe the performance of the sensor at different temperatures.

Application scenario:

PFCL201CE 10KN 3BSX105983-100 Pressure sensors are widely used in industrial areas requiring high precision measurement, such as industrial weighing, process control, metrology and automation.

Installation and layout:

The sensor should be mounted in one direction to provide sufficient measurement force (FR) to achieve the highest possible accuracy.

When installing, the sensor should be placed in a position that can accurately perceive the measured force and avoid force interference in other directions.