TC-215-01-4M5 ICS TRIPLEX 以太网通信模块

这是 ICS TRIPLEX（英维思/Triconex 系列）的 工业以太网通信接口卡，用于 DCS 控制系统中实现控制器与上位机/其他设备之间的 TCP/IP 网络通信。

核心参数

关键功能

1. 确认系统平台：TC-215-01-4M5 专用于 ICS TRIPLEX TMR 冗余控制系统，不能用于其他品牌 DCS（如 Foxboro I/A、ABB AC800M 等）。
2. 与 TC-215-02 系列的区别：01 系列是直接通信卡，02 系列是远程扩展器配套端，不要混淆。
3. 4M5 的含义：后缀 "4M5" 通常表示光纤/电缆长度规格（4米5），采购时注意与实际布线距离匹配。
4. 冗余需求：如果系统要求通信冗余，需配置两块相同模块。

TC-215-01-4M5 ICS TRIPLEX Ethernet Communication Module

This is the industrial Ethernet communication interface card of ICS TRIPLEX (Envision/Trigonex series), used for TCP/IP network communication between controllers and upper computers/other devices in DCS control systems.

core parameters

Project specifications

Model TC-215-01-4M5

Brand ICS TRIPLEX

Type Ethernet Communication Module (BIM)

Communication Protocol TCP/IP

Communication speed 10/100 Mbps

Input voltage 24V DC

Maximum power 5W

Working temperature -40 ° C~+70 ° C

Dimensions 76.2 mm × 127 mm × 25.4 mm

Weight 0.2 kg

Shell material aluminum alloy

Protection level IP20

Installation method: DIN rail installation

key function

Function Description

TCP/IP communication is used as a slave to access industrial Ethernet and communicate with the upper computer/HMI/historical server

10/100M adaptive compatible with Ethernet environments of different speeds

Industrial grade design aluminum alloy shell for heat dissipation, with built-in overload/short circuit/overvoltage protection

High anti-interference industrial grade chip, suitable for harsh electromagnetic environments on site

DIN rail installation and unified installation of ICS TRIPLEX other I/O modules

Confirm system platform: TC-215-01-4M5 is dedicated to ICS TRIPLEX TMR redundant control system and cannot be used for other brands of DCS (such as Foxboro I/A, ABB AC800M, etc.).

The difference from TC-215-02 series: 01 series is a direct communication card, and 02 series is a remote extender matching end, do not confuse.

The meaning of 4M5: The suffix "4M5" usually indicates the length specification of the fiber/cable (4 meters and 5 meters). When purchasing, pay attention to matching the actual wiring distance.

Redundancy requirement: If the system requires communication redundancy, two identical modules need to be configured.